More pictures
OZONEGENERATOR Ozone gas detector
|
Gross Total Price and Shipping Fee >>
|
|
| Model: | OG-LAN-O3TESTER-DM509 |
| Average Rating: | Not Rated |
|
Ozone gas, temperature ans humidity detector and tester Parameters: Ozone gas, temperature and humidity detection |
|
|
|
|
Description
OZONEGENERATOR Ozone gas detector
Personal precautions according to the ozone gas safety data sheet after ozone treatment: switch off the ozone generator or disconnect the power supply, remove unauthorized persons. Ventilate the contaminated area for a minimum of 30 minutes. Do not return to the room until the ozone level has dropped to a safe level.
All this can now be easily monitored with the 2.8 "color liquid crystal display ozone gas detector, which also has user-adjustable alarm thresholds. This allows you to monitor the ozone gas drop below the allowable level after each treatment.
Its use is recommended after disinfection and deodorization to control the air in the treated rooms. We recommend it for any place where an ozone generator has been used, be it in the office, at home or even in a vehicle.
Safety limit value for ozone gas: 0.1 PPM (0.2 mg / m3)
Parameters:
Ozone gas, temperature and humidity detection
Detection range: 0.00 to 5.00 PPM
Sampling time: 1.5 seconds
Adjustable alarm value (0.1-0.3-0.6 PPM)
TFT LCD display, 320 * 240 pixels
Built-in 2000 mAh Li-battery
Low battery warning
5V Micro USB charging
Material: ABS
Color: black + orange
Size: 164 x 74 x 26 mm
Weight: 500g
Parameters
| Detection range | 0.00 to 5.00 PPM |
| Sampling time | 1.5 seconds |
| Adjustable alarm value (0.1-0.3-0.6 PPM) | |
| TFT LCD display, 320 * 240 pixels | |
| Built-in 2000 mAh Li-battery | |
| Low battery warning | |
| 5V Micro USB charging | |
| Material | ABS |
| Color | black + orange |
| Size | 164 x 74 x 26 mm |
| Weight | 500g |